Wednesday, November 12, 2014

All in the Family Earflap Hat

All in the Family Earflap Hat
Child Size

Although I've made hats of many other silhouettes, a reader recently reminded me that I had yet to post an earflap. And this reminder instantly reminded me of yet another thing - namely, that the last time I made an earflap hat, I had far fewer knitting techniques in my toolbox, and ended up having to cobble together a hat, some flaps, and some weird cast-ons with a crocheted edging, to hide the mess. Now that I've progressed, however, I designed this All in the Family Earflap Hat with a basic but rather elegant design that uses a provisional cast on for a seamless, nicely finished look. Plus, it doesn't require any crocheted hoo-ha for the edging (although of course you're welcome to crochet as much hoo-ha as you like; no judgment here). Also, as a note, I should mention that, though I very much enjoyed this yarn, I found the gauge recommendations to be WAY off. Thusly (and especially with a basic stockinette hat such as this), I highly recommend that you check your gauge before accidentally knitting a hat that would fit the Jolly Green Giant better than your kid.

Sizes: Toddler (Child; Small Adult; Large Adult) (in measurements, and roughly, the toddler size should fit an 18" - 19" inch head, the child a 19.5" - 21" inch head, the small adult up to a 21" head, and the large adult up to a 23" head)

Yarn: Berroco Ultra Alpaca (50% Alpaca, 50% Wool; 215 yards [198 meters]/100 grams); #6288 Blueberry Mix - 1 skein

From the side.
Needles: 16" circular needle in size US 8, one set of double pointed needles (dpns), also in size US 8, and one 10 or 10 1/2 needle for the provisional cast on

Notions: Tapestry needle

Gauge: 16 stitches = 4 inches

So let's get started! Using your largest needle and a provisional cast on, cast on 70 (77; 77; 84) stitches. Then, transfer stitches to your size 8 circular needle, place marker, and join in round. Knit until piece measures about 5.5" (6"; 7.5"; 8"), and then we'll begin the decreases, as follows. Remember to switch to your dpns once you're down to about 60 stitches.

Decrease Row 1: * k5, k2tog; rep from *

Decrease Row 2: knit

Decrease Row 3: * k4, k2tog *

Wednesday, November 5, 2014

Kids' Banana Beanie

Kids' Banana Beanie

The baby is 6 months old now, so I figured it was high time he made his debut. And what better way to do it than sporting a chunky weight baby hat that can be sized all the way up to 12 years (he's wearing the 9 month size, though - I just couldn't bring myself to knit something he would outgrow immediately)? Anyway, there's not really much else to say about this piece, except for the fact that it's a quick and easy knit, and that its subtle pattern is oh-so-cute.

Sizes: 6 months (9 months; 12 months; up to 3 years; up to 12 years) (to be clearer on sizes: the 6 month will fit up to a 16" head, the 9 month a 17" head, the 12 month an 18" head, the 3 year a 19" head, and the 12 year up to a 21" head)

Yarn: Berroco Vintage Chunky (50% Acrylic, 40% Wool, 10% Nylon; 130 yards [120 meters]/100 grams); #6122 Banana - 1 skein, plus roughly 10 yards of contrasting color, if desired for pompom

A better shot of the pattern,
And the pom pom.
Needles: 16" circular needle in size US 10, one set of double pointed needles (dpns), also in size US 10

Notions: Tapestry needle, stitch marker

Gauge: 14 stitches = 4 inches on size 10 needles

So let's get started! First, as a side note, I knit this entire hat with my size 10 needles. However, you could cast on and knit the first five-ish rows with a size 9, if you desired, for a bit of extra snugness at the bottom of the hat. And now that the note is out of the way - using the 16" circular needle of your desired gauge, cast on 52 (56; 60; 64; 68) stitches, place marker, and join in round. Then we'll knit one set-up row, like so:

Set-up Row: * k3, p1; rep from *

And once that's done, let's move straight to our main pattern, which goes as follows:

Row 1: * k1, p1 *

Rows 2 & 4: * k1, slip 1 with yarn in back, k1, p1 *

Row 3: * k3, p1 *

Wednesday, October 29, 2014

Super Slouch Hat

Super Slouch Hat

Some of you asked, and now I'm delivering! The Super Slouch Hat is not just an airy puff of head-topping goodness, it's also knit entirely (wait for it... wait for it...) BACK AND FORTH! So yes, that means that this is the perfect hat for the dpn-adverse among you. It also doesn't have to be nearly as slouchy as it's shown in the picture - with one less pattern repeat and a smaller needle, this would make a more fitted but equally delectable hat. And hey, if you do it that way - take pictures, I'd love to see it!

Yarn: Berroco Folio (65% Superfine Alpaca, 35% Rayon; 219 yards [200 meters]/50 grams); #4502 Orr - 1 skein

The finish.
Needles: Size US 4 needles, size US 7 needles (or US 5 or US 6 for a less relaxed fit)

Notions: Tapestry needle, 8 stitch markers

Gauge: 22 stitches = 4 inches in stockinette on size 5 needles

So let's get started! First, then, using your size 4 needles, cast on 114 stitches loosely (if you want to be extra clever, leave a tail long enough for seaming later). Then we'll knit the following ribbing rows, to create the bottom edge of the hat:

Ribbing Row 1 (wrong side): p2, * k2, p2; rep from *

Ribbing Row 2: k2, * p2, k2 *

Knit ribbing rows 1 & 2 until piece measures roughly 1 1/4" and you've just finished row 1 of the pattern. Now it's time to switch to our size 7 needles (size 5 or 6 needles if you'd like a more fitted hat) and knit one set-up row to place our extra markers, which goes as follows:

Wednesday, October 22, 2014

Rose Briar Bag

Rose Briar Bag

I'll admit it; my reasons for designing this Rose Briar Bag are totally self-serving. Namely, I think it will make a nice holiday gift, when the time comes. Of course, it has other nice details as well, such as the triangular base (it's knit bottom-up) and the lace stripes. As pictured, it's also finished with a three needle bind off to attach the handles, although you're welcome to seam them instead.

Yarn: Lily Sugar 'n Cream (100% Cotton; 120 yards [109 meters]/70.9 grams); #01322 Lilac - 3 skeins

A closer look
Needles: One 16" circular needle in size US 7, and one set of double pointed needles, also in size US 7, size 10 or larger needles for provisional cast on, and one 24" circular needle in size US 7 (recommended but not required)

Notions: Tapestry needle, four stitch markers

Gauge: 20 stitches = 4 inches in stockinette on size 7 needles

First and foremost, let's knit some handles! So, using your largest needles and a provisional cast on, cast on 11 stitches (if you plan to seam this bag rather than use the three needle bind off to attach the handles, you don't need to use a provisional cast on). Then switch to whichever set of size 7 needles you want to work back and forth on and knit the following set-up rows:

Set-up Rows 1 & 3 (wrong side): p11

Set-up Row 2: k11

Wednesday, October 15, 2014

Horseshoe Cable Muffler

Horseshoe Cable Muffler

Where do I start with this one? How about at the very beginning, back when my sister and I were wee little girls and loved to play nothing more than "Old Days," where we dressed up in Little House on the Prairie-worthy thrift store clothes and pretended to be princesses-turned-scullery-maids, or occasionally scullery-maids-turned-princesses. And how is this relevant? Well, because the Horseshoe Cable Muffler is exactly the type of piece that we would have relished back then, with its rustic color and snuggly, old-timey aesthetic. Of course, this cowl/scarf isn't just relegated to the past, as you can dress it up three different ways for a very modern look. As a note, however, if you're planning to use it mainly as a scarf, you will need extra yardage of your yarn and you'll want to continue the piece longer than I made it for the best effect.

The end of the muffler.
Yarn: Skacel Alpaca Seta (75% Baby Alpaca, 18% Silk, 7% Nylon; 137 yards [125 meters]/50 grams); #11 Lemon Grass Twist - 2 skeins

Needles: One set of straight needles in size US 6, two double pointed needles (dpns), also in size US 6, and a size US 8 or larger needle for your provisional cast on

Notions: Tapestry needle, cable needle (cn), stitch holder


Gauge: 22 stitches = 4 inches

So let's get started!


Using a provisional cast on and your larger needles, cast on 38 stitches. Then switch to your size 6 needles and we'll move straight to our pattern. You'll need the following terminology to continue:

cable front (cf): transfer next 2 stitches to cn and hold in front, k2, k2 from cn