Wednesday, December 4, 2013

Twisted Rib Hat

Twisted Rib Hat

Okay folks, here we have another sale yarn special, born from a great deal at the back rack of a Wisconsin Craft Market. That being said, I think this turned into a fairly attractive, gender-neutral beanie which pairs vertical ribbing with ever-so-slight horizontal stripes of slouch. And it's got a nice finishing. That counts for something, right?
The pattern, with its subtle twisted ribs

Yarn: Berroco Blackstone Tweed Chunky (65% Wool, 25% Superkid Mohair, 10% Angora Rabbit Hair; 60 yards [55 meters]/50 grams); #6607 Wintry Mix - 2 skeins

Needles: One 16" circular needle in size 10.5, one set of double-pointed needles (dpns), also in size 10.5

Notions: Tapestry needle, stitch marker or scrap yarn to mark row

Gauge: 13 stitches = 4 inches

Note (2/03/14): Since I made this hat for my husband, I've been able to observe how it wears. And while it's his favorite hat, it's also gotten looser with time, so I recommend knitting at least the band with a smaller needle size (size 9 or 10), for fit. The whole thing could also be knit on a size 10 needle if you prefer a slightly more snug hat.

So let's get started. Using your circular needle, cast on 72 stitches loosely, place marker, and join in round. Knit five rows of the following ribbing row before moving on to the main pattern:

Ribbing Row: * k2, (p1, k1) 3 times, p1; rep from *

And now that the band is done, let's take a moment to learn some notation for the pattern, as follows:

rt (right twist): knit two together, leaving stitches on left-hand needle; next, insert right-hand needle from the front between the two stitches just knitted together, and knit the first stitch again. Finally, slip both stitches from left-hand needle together

lt (left twist): with right-hand needle behind left-hand needle, skip one stitch and knit the second stitch in back loop; then insert right-hand needle into the backs of both stitches and k2tog-b (knit two together through back loops, inserting right needle from the right)

Now let's get started!

Rows 1, 3, 5, & 7: * k2, p1, k5, p1 *

Rows 2, 4, & 6: * rt, p1, rt, k1, lt, p1 *

Rows 8 & 10: * rt, p3, k1, p3 *

Row 9: * k2, p3, k1, p3 *

Knit rows 1 - 10 twice, and then knit rows 1 - 6 once more. Now, it's time to work the decrease, which goes as follows:

Decrease Row 1: remove marker, slip first stitch, and replace marker. Then; * lt, p2, k1, p2, rt *

Row 2: * p1, k1, p2, k1, p2, k1, p1 *

Row 3: * p1, ssk, p1, k1, p1, k2tog, p1 *

Row 4: * p1, lt, k1, rt, p1 *

You may want to switch to your dpns about now...

Row 5: * p2, sl1-k2tog-psso, p2 *

Row 6: * p2, k1, p2 *

Row 7: * p2tog, k1, p2 *

Row 8: * p1, k1, p2tog *

Row 9: slip first stitch to last needle. Then; * k1, p2tog *

Row 10: * p2tog *

Clip yarn and thread through remaining 8 stitches. Pull tight, thread to inside, and knot. Tuck in ends. Wear with pride, 'cause you look like a million bucks. Or at least however much you spent on the yarn...




9 comments:

  1. Hey Gretchen! So I am about to begin this pattern, but I have trouble understanding the Right and Left twists that you have noted. If you could post a video maybe that would be very helpful. Thank you so much!

    ReplyDelete
    Replies
    1. Hi there!

      Making a video of that is on my to-do list! :) In the meantime, this one explains it: https://www.youtube.com/watch?v=isJY--558Fc

      Delete
  2. Hi, in the beginning of the pattern after the ribbing, do you knit rows 1-10 a total of two times or three times? I love the design of this hat and my brother wants me to knit it for him, but just wanted to clarify this part before I start. Thanks, Laura

    ReplyDelete
    Replies
    1. Twice in total, and then rows 1 - 6 again. Let me know if you have any other questions!!! :)

      Delete
    2. Ok, thanks very much, excited to get started on this! Thanks again, Laura

      Delete
  3. Hey Gretchen I'm thinking of doing this in a worsted weight. What do you think?

    ReplyDelete
    Replies
    1. Totally! I suggest using whatever needle size gives you 18 stitches per inch for the body of the hat. Cast on 99 stitches with one size smaller needle, switch after the ribbing, and go from there! :)

      Delete
  4. Please can you share this on straight needle using a yarn with gauge 22 stitches to 4 inches,

    ReplyDelete
    Replies
    1. I've adapted the pattern for the written gauge below. To change it to your gauge, cast on 119 stitches and add ribbing rows and body rows as needed. I also had to rewrite parts of the decrease since it wasn't possible to do the twists on wrong side rows. Hopefully it still works out!

      So let's get started. Using your smaller needles, cast on 74 stitches loosely. Then we’ll knit the following ribbing row before moving on to the main pattern:

      Ribbing Row 1 (right side): k1, * k2, (p1, k1) 3 times, p1; rep from *, end k1

      Ribbing Row 2: p1, * k1, (p1, k1) three times, p2 *, end p1

      Knit ribbing rows 1 & 2 twice, and then knit ribbing row 1 again. Transfer work to your gauge needles and continue like so:

      Rows 1, 3, 5, & 7 (wrong side): p1, * k1, p5, k1, p2 *, end p1

      Rows 2, 4, & 6 (right side): k1, * rt, p1, rt, k1, lt, p1 *, end k1

      Rows 8 & 10: k1, * rt, p3, k1, p3 *, end k1

      Row 9: p1, * k3, p1, k3, p2 *, end p1

      Knit rows 1 - 10 twice, and then knit rows 1 - 7 once more. Now, it's time to work the decrease, which goes as follows:

      Decrease Row 1 (right side): * lt, p2, k1, p2, rt *, end k2

      Row 2: p2, * k1, p1, k2, p1, k2, p1, k1 *

      Row 3: * p1, ssk, p1, k1, p1, k2tog, p1 *, end k2

      Row 4: p2, * k1, p5, k1 *

      Row 5: * p2, sl1-k2tog-psso, p2 *, end k2

      Row 6: p2, * k2, p1, k2 *

      Row 7: * p2tog, k1, p2 *, end k2

      Row 8: p2, * k2tog, p1, k1 *

      Row 9: k1, * k1, p2tog *, end k1

      Row 10: p1, * k2tog *, end p1

      Clip yarn and thread through remaining stitches. Pull tight, thread to inside, and knot. Seam from bottom edge and tuck in ends.

      Delete