Doug Fir Mittens

 

Doug Fir Mittens

I don't have a terribly entertaining story about these mittens, but I'll tell it anyway. First, I wanted to design a pair. Then, I did. And though the Doug Fir Mittens are definitely on the basic side, they also have a few nice features. The cuffs, for instance, are long enough to tuck into your jacket and keep your wrists warm. Plus, the tops are nice and tapered! With any luck, I'll also be adding some kid sizes soon, although these are only sized for adults.

Sizes: Small Adult (Medium Adult; Large Adult) (the small is for a hand roughly 7 1/2" - 8" in circumference at the base of the thumb and 7" from base of palm to fingertips, and the large for a hand roughly 8 1/2" - 9" in circumference at the base of the thumb and 8" from base of palm to fingertips - and finally, go medium if you're between)

Yarn: Berroco Vintage (52% Acrylic, 40% Wool, 8% Nylon; 218 yards [200 meters]/100 grams); #5177 Douglas Fir – one skein (all sizes)

The thumb join. Yup, looks like a thumb.

Needles: one set of double-pointed needles (dpns) in size US 7, one set of dpns in size US 5

Notions: Tapestry needle

Gauge: 20 stitches = 4 inches on size 7 needles

So let's get started! Using your size 5 needles, cast on 40 (40; 44) stitches and then distribute the stitches between your needles as follows: 12 stitches on the first needle, 16 stitches on the second needle, and 12 stitches on the third needle (12 stitches on the first needle, 16 stitches on the second needle, and 12 stitches on the third needle; 14 stitches on the first needle, 16 stitches on the second needle, and 14 stitches on the third needle). Join in round, and then proceed as follows:

Ribbing Row 1: * p1, k2, p1; rep from *

Belt Welt Hat

Belt Welt Hat

First, I should mention that I'm pretty sure this is the most expensive skein of yarn I've ever purchased, and it was WORTH EVERY PENNY! So smooth, so wonderful to knit - seriously, I would take a bath in the stuff if I could afford it. Luckily, you don't have to use this luxurious of a yarn to make this pattern pop - any heavier weight worsted should do. But perhaps the best thing about this pattern is that it's a pretty simple knit that still yields a lot of graphic appeal. Or in other words, you won't have to put in a lot of work in order to end up with a hat that you'll be pleased with.

Sizes: Small Adult (Large Adult)

Yarn: Simplinatural by HiKoo by Skacel (40% Baby Alpaca, 40% Fine Merino Wool, 20% Mulberry Silk; 183 yards [167 meters]/100 grams); #098 Bright Blue – one skein (both sizes)

The finish.

Needles: one 16" circular needle in size US 6, one 16" circular needle in size US 8, one set of double pointed needles (dpns), also in size US 8 (one 16" circular needle in size US 7, one 16" circular needle in size US 9, one set of dpns, also in size US 9)

Notions: Tapestry needle, stitch marker

Gauge: 18 stitches = 4 inches on size 8 needles, 16 stitches = 4 inches on size 9 needles

So let's get one thing straight, here. The only difference between the size small hat the large is needle size - if you want to make a small hat, use 6s and 8s. If you want a large hat, use 7s and 9s! And now that we've got that taken care of, using your smaller circular needle, cast on 90 stitches, place marker, and join in round. Then we'll knit the following ribbing row:

Ribbing Row: * p1, k1; rep from *

Knit this ribbing row until piece measures 4". And now, it's time to switch to your larger needles and the main pattern, which is Belt Welt from page 6 of Barbara G. Walker's A Second Treasury of Knitting Patterns, and goes as follows:

Double Pom Earflap Hat

Double Pom Earflap Hat

As I've mentioned before, every once in a while, one of my children decides that they need something new and then pesters me until I make it for them. Such was the case with this hat. My three-year-old has a friend with a double pompom hat; hence, he needed one too. Luckily, he is less picky than my five-year-old, and let me pick the stitch pattern. And this two-color design looks fantastic in person and adapts perfectly to the round. Oh, and did I mention that I've sized this hat to fit everyone from toddler to adult as well???*

* I've also updated the marker placement rows of this pattern as of January 14, 2016 (they were missing a marker!).

Sizes: Toddler (Child; Small Adult; Large Adult)

Yarn: Cascade 220 Superwash (100% Superwash Wool; 220 yards [200 meters]/100 grams); #809 Really Red – one skein (color A) and #871 White - one skein (color B) (all sizes)

The pattern. It's a winner!

Needles: One 16" circular needle in size US 7, one set of double-pointed needles (dpns), also in size US 7 (for working the i-cords), one US 9 or larger needle for provisional cast on

Notions: Tapestry needle, stitch marker, stitch holders or scrap of yarn for holding stitches

Gauge: 20 stitches = 4 inches in stockinette on size 7 needles

So let's get started! Using your large needle, your color A yarn and a provisional cast on, cast on 90 (96; 102; 108) stitches, place marker, and join in round. Transfer work to your 16" size 7 circular needle and knit four rows around. Switch to your color B yarn and knit one row around. And now, it's time to begin our pattern, which is Cage Pattern from page 65 of Barbara G. Walker's A Second Treasury of Knitting Patterns, and goes as follows:

Row 1: using your color A yarn, * slip 2 with yarn in back (wyib), k4; rep from * 

Row 2: using your color A yarn, * slip 2 wyib, p4 *

I Dream of Beaches Cowl

I Dream of Beaches Cowl

A reader recently asked me if I had any true infinity style cowls, and I had to say no. And while this cowl isn't technically an infinity cowl either, you could totally make it that way! I even provide instructions! Whether you create a Möbius strip with this thing or not, however, it's a nice, completely seamless lightweight cowl that will suit either the winter or the spring that will eventually come. So whenever you wear it, you can dream of beaches...

Yarn: Berroco Fuji (38% Silk, 25% Cotton, 22% Rayon, 15% Nylon; 125 yards [115 meters]/50 grams); #9203 Sandy - 2 skeins

The back. Seamless, I tell ya!

Needles: One set of needles in size US 7, one set of needles in size US 10, and one cable needle (cn) or double pointed needle for cabling


Notions: Tapestry needle

Gauge: 20 stitches = 4 inches on size 7 needles

So let's get started! As I mentioned, this piece is perfectly seamless, which means we'll be starting with a provisional cast on. Using your size 10 needle, then, cast on 30 stitches provisionally. Transfer stitches to your size 7 needle, and then proceed as follows with some set up rows, as you'll find below. Oh, and here's the notation we'll need:

front cross (fc): slip 4 stitches to cn and hold in front; k4; k4 from cn

Coin & Medallion Hat

Coin & Medallion Hat

Everything about this hat was inspired by the yarn, since the color strikes me as a perfect match for the coin and medallion cables. And not only is this stuff a gorgeous shade, it also has a lovely feel, as buttery as the hue. I will note, however, that if you're making this hat for a larger-headed person, you will probably want to use a slightly heavier weight worsted, or even a light chunky (think more like 16 stitches per four inches). You can size your needles up as needed.

Yarn: Malabrigo Worsted (100% Merino Wool; 210 yards [192 meters]/100 grams); #022 Sauterne – one skein

Needles: one 16" circular needle in size US 9, one 16" circular needle in size US 6, one set of double pointed needles (dpns), also in size 9, and one cable needle (cn)

Notions: Tapestry needle, 3 stitch markers

Gauge: 18 stitches = 4 inches on size 8 needles

Edit as of 3/07/15: Raveler sandeleh has very kindly created charts for this hat, which you can find as images at the bottom of this post. The only note is that the cables in the chart do not contain twisted stitches, while as in the written pattern, they do. You can twist or not twist at your leisure. Also, row 1 of the chart is the ribbing row - you will, naturally, want to repeat it more than once, as directed. And please just email if you want a bigger version of the charts (ballstothewallsknits@gmail.com). Thanks again sandeleh!!! :)

So let's get started! Using your size 6 needle, cast on 96 stitches, place marker, and join in round. Then we'll work on the ribbing row, as follows:

Ribbing Row: * k1, p1, (k2, p2) twice, k2, p1, (k2, p2) twice, k2, p1 * 

Knit this ribbing row until piece measures about 1 1/4", and then switch to your size 9 needle. Now, it's time to begin our main pattern, which is a combination of Coin Cable and a modified version of Tyrolean Medallion, from Barbara G. Walker's A Treasury of Knitting Patterns (on pages 261 and 247, respectively). To do these, let's first define some terms.

Fantastic Welted Cowl

Fantastic Welted Cowl

Sometimes, all you need is a simple cowl with a lot of texture. And if that's what you're looking for, the Fantastic Welted Cowl fits the bill, with both a ripple effect and purled accents. Furthermore, though I've pictured the child size, you can also make it for an adult or a toddler. So cute!

Sizes: Toddler (Child; Adult)

Yarn: Plymouth Yarn Jeannee (55% Cotton, 45% Acrylic; 111 yards [101 meters]/50 grams); #08 - 1 skein (2 skeins ; 2 skeins)

A better picture of the pattern

Needles: 16" circular needle in size US 8, 16" circular needle in size US 7

Notions: Tapestry needle, stitch marker

Gauge: 18 stitches = 4 inches

So let's do this! First, using your size 7 needle, cast on 77 (88; 99) stitches, place marker, and join in round. Then we'll knit a few edging rows, as follows:

Edging Row: * (k1, p1) twice, k3, (p1, k1) twice; rep from *

Knit edging row 4 (4; 6) times, and then switch to your size 8 needle. Next, we'll move on to our main pattern, which is Welting Fantastic from page 143 of Barbara G. Walker's A Treasury of Knitting Patterns, except adapted for the round. And it goes as follows:

Rows 1, 3, & 5: purl

Five Pillars Hat

Five Pillars Hat

I would tell you how many times I frogged this thing, except I can't count that high. Okay, so I'm exaggerating. But it is no exaggeration that I put extra work into the Five Pillars Hat to make it not just run of the mill, but extraordinary. And although the design is unisex, I highly recommend knitting it with a slightly larger gauge yarn if you're making it for a larger-headed person or a man (think 15 stitches = 4 inches instead of 16, and possibly a size US 10 needle to get your gauge). Oh, and, as of October 6, 2015, I've charted this pattern. You can find the chart below*. :)

* Updated as of 08/22/16

Yarn: Cascade Yarns 220 Superwash Aran (100% Superwash Merino Wool; 150 yards [137.5 meters]/100 grams); #817 Aran - one skein

The back.

Needles: One 16" circular needle in size US 7, one 16" circular needle in size US 9, one set of double pointed needles (dpns), also in size US 9, and a cable needle (cn) or double pointed needle for cabling


Notions: Tapestry needle, stitch marker

Gauge: 16 stitches = 4 inches on size 9 needles

So let's make a hat, eh? First, then, using your size 7 needle, cast on 85 stitches, place marker, and join in round. Then we'll work a few ribbing rows, as follows:

Ribbing Row: * knit two stitches through their back loops (k2-tbl), (p1, k1) 6 times, p1, k2-tbl; rep from *

Around We Go Headband

Around We Go Headband

The story behind this piece is simple: recently, I saw one of the other moms at my kids' preschool in a knitted headband similar to this one and I thought, "hey, that's cool." And yes, the story is boring, but the finished product is still striking, with lots of graphic appeal. It's also very easy to size to various lengths, which I'll talk about more in a bit, and is a great stashbuster. Yay, busting stashes!

Sizes: Child (Adult)

Yarn: Cascade Yarns Cascade 220 Heathers (100% Peruvian Highland Wool; 220 yards [200 meters]/100 grams); #2439 Gelato - one skein

The pattern.
Plus some of the fine make up airbrushing that went into
my lovely fake head.

Needles: One set of needles in size US 7

Notions: Tapestry needle

Gauge: 20 stitches = 4 inches

So let's get started! To begin, cast on 18 (22) stitches. Then we'll move right to the main pattern, which I've written separately for each size. First, then, the terminology:

rt (right twist): knit two together, leaving stitches on left-hand needle; next, insert right-hand needle from the front between the two stitches just knitted together, and knit the first stitch again.  Finally, slip both stitches from left-hand needle together

lt (left twist): with right-hand needle behind left-hand needle, skip one stitch and knit the second stitch in back loop; then insert right-hand needle into the backs of both stitches and k2tog-b (knit two together through back loops, inserting right needle from the right)

Butterfly Stitch Cowl

Butterfly Stitch Cowl

Okay, I'll own it: a linen blend yarn isn't particularly winter-y, and I should probably stick to super cold-weather yarns now that the temperature has dropped. Luckily for me, though, this pattern makes such a robust and supple fabric that the yarn's fiber mix hardly seems to matter. And it's not just the Butterfly Stitch Cowl's yarn that's versatile, either, it's also the sizing. In fact, I've provided a version for everyone 2 and older. Hello mommy-daughter matching time!

Sizes: Toddler (Child; Adult)

Yarn: Plymouth Yarn Linen Concerto (48% Rayon, 42% Linen, 10% Cotton; 101 yards [92 meters]/50 grams); #01 Cream - 2 skeins (2 - 3 skeins, depending on length; 3 skeins)

A better look at the pattern

Needles: 16" circular needle in size US 5

Notions: Tapestry needle, stitch marker

Gauge: 22 stitches = 4 inches

So let's get started! First, cast on 100 (110; 120) stitches, place marker, and join in round. Then we'll knit five set-up rows, as follows:

Set-up Rows 1 - 4: purl

Set-up Row 5: knit

And now let's move on to the main pattern, which is Butterfly Stitch from page 101 of Barbara G. Walker's A Treasury of Knitting Patterns, except adapted for the round. Before we get to that, however, let's define our butterfly stitch as follows:

bs (butterfly stitch) (yes this abbreviation makes me happy): slip 1 stitch purlwise (this stitch should be the middle stitch above your five slipped bars), then insert right-hand needle down behind 5 bars and pull them up, then insert left-hand needle up behind the 5 bars (which will orient them knitwise). Finally, slip middle stitch back to left-hand needle and knit all 5 bars and middle stitch together

Sailor's Rib Cowl

Sailor's Rib Cowl

I bought this yarn nearly a year ago, I believe, with the intention of making a nice scarf for my husband with it. But since he was never very enthusiastic about said scarf, it never got made. And then he renewed his determination to bike commute this winter and it dawned on both of us: he didn't need a scarf, he needed a cowl. A nice, snug, long cowl that he can pull up over his face when the temperatures dip into the teens and the winds are blowing. And, to be quite honest, I'm kind of amazed that the idea never occurred to me before. After all, while I doubt he'll start wearing this cowl as a new man fashion statement (not because it isn't pretty, but because I haven't seen many men in cowls), it tucks into a jacket with much less bulk than a scarf, and looks just as nice.

Yarn: Cascade Yarns Cascade 220 (100% Peruvian Highland Wool; 220 yards [200 meters]/100 grams); #9458 Bainbridge Island Heather - 1 skein

A closer look at the pattern

Needles: 16" circular needle in size US 7

Notions: Tapestry needle, stitch marker

Gauge: 20 stitches = 4 inches

So let's make this bad boy! First, cast on 100 stitches, place marker, and join in round. And then we'll move straight to the main pattern, which is Fisherman's Rib from page 4 of Barbara G. Walker's A Second Treasury of Knitting Patterns, except adapted for the round. Anyway, it goes as follows:

Rib & Welt Baby Blanket

Rib & Welt Baby Blanket

It's embarrassing to admit, but I'll do it anyway; I started knitting this blanket very shortly after my six month old baby was born, and I only just finished it yesterday. Of course, that doesn't mean that I don't dig the pattern or anything - I do!!! It's reversible and everything!!! It is not, however, as quick of a knit as I'm used to, since it's basically a 26" wide x 29" high rectangle made out of sport weight yarn. That being said, if you're going to make a baby blanket, the Rib & Welt Baby Blanket is a pretty good option. It's strikingly graphic, and did I mention the whole reversible thing? Plus, the pattern is very easy to learn, and babies look super cute on it.

Yarn: Patons Beehive Baby Sport (70% Acrylic, 30% Nylon; 304 yards [278 meters]/85 grams); #11142 Little Boy - three skeins

The pattern

Needles: 24" or longer circular needle in size US 5

Notions: Tapestry needle, stitch marker

Gauge: 24 stitches = 4 inches

So let's get started! First, then, cast on 174 stitches loosely. Then knit 1" in a * k1, p1 * ribbing. On your last row like this, place one stitch marker 10 stitches from the beginning of the row, another 82 stitches from the beginning, another 92 stitches from the beginning, and the final marker 10 stitches from the end of the row. And then let's proceed as follows in the main pattern, which incorporates two panels of Rib and Welt Diagonals from page 9 of Barbara G. Walker's A Second Treasury of Knitting Patterns. Like so, then:

Row 1: * k1, p1 * until you reach first marker, slip marker, then; * k1, p1, k1, p5; rep from * until you reach second marker. Slip marker, * k1, p1 * until third marker, slip marker, and then; * k1, p1, k1, p5 * until you reach final marker; slip marker, * k1, p1 * to end

Row 2 and all even rows: knit the knit stitches and purl the purl stitches, slipping all markers when you come to them