V-Neck Cowl

V-Neck Cowl

Okay, so I began this cowl with the idea that it would be more roundish, but I ended up really loving the V-shape, especially when I embellished the bottom (close-up pictures later). I also love the way this yarn knits, drapes, and feels, and this pattern ended up being a good statement piece. If, you know, you're trying to say, "I like to knit V-neck cowls."

Yarn: Cascade Yarns Ultra Pima (100% Pima Cotton; 220 yards [200 meters]/100 grams); #3705 Heathered Pansy - one skein

Needles: Straight or longish circular needle(s) in size 6 and two double-pointed needles (dpns), also in size 6 (or 5, or whatever's close that you've got hanging around).

Notions: Tapestry needle and stitch marker

Notions for optional embellishment: enough beads to do what you want to do, a needle small enough to fit through their little holes, and thread in a color that works with your piece

Gauge: 22 stitches = 4 inches in stockinette

Okay, so let's get started! First, cast on 162 stitches. Next, knit one set-up row (this will be the wrong side of your piece), placing your marker after 81 stitches. And now it's time to begin the pattern, which goes as follows:

Swiss Fan Cowl

Swiss Fan Cowl

Okay, here's another basic cowl, with a bit of added interest due to the scalloped cast-on edge (yes, it looks better upside down). And yeah, that's all I've got in the way of introduction...

Yarn: Cascade 220 Heathers (100% Peruvian Highland Wool; 220 yards [200 meters]/100 grams); #9442 Baby Rose - one skein

A close-up of the pattern.

Needles: One 24" circular needle in size 7

Notions: Tapestry needle, stitch marker or yarn scrap to mark end of round 

Gauge: 20 stitches = 4 inches on size 7 needles

Loosely cast on 126 stitches, place marker, and join in round. The design we'll be knitting is a variation of the Swiss Fan pattern, from page 324 of Barbara G. Walker's A Second Treasury of Knitting Patterns, and goes as follows:

Row 1: * p1, k7, p1; rep from *

Rows 2 & 6: * p1, ssk, (yo, k1) 3 times, yo, k2tog, p1 *

Rows 3 & 7: * p1, k9, p1 *

Rows 4 & 8: * p1, ssk, k5, k2tog, p1 *

Rows 5 & 9: * p1, k7, p1 *

Rows 10 & 11: purl

Knit Rows 1 - 11 four times through, and then knit Rows 1 - 8 once more. Bind off loosely. Finally, tuck in ends, 'cause you're done.

Dewdrop Cowl

Dewdrop Cowl

If you've looked at a few of my patterns, you've probably already figured out that I love a cowl (so efficient! good for bicycling! less yarn! etc). So here's a basic but interesting design, worked with worsted weight yarn and a pattern that never gets more complicated than a sl1-k2tog-psso. Overall, I think it's a decent design for a variegated yarn, and easy to work.

Yarn: Berroco Vintage Colors (50% Acrylic, 40% Wool, 10% Nylon; 217 yards [200 meters]/100 grams); #5222 Oasis - one skein

Needles: One 24" circular needle in size 7

The pattern

Notions: Tapestry needle, stitch marker or yarn scrap to mark end of round 

Gauge: 20 stitches = 4 inches on size 7 needles

So let's get started! Cast on 138 stitches, place marker, and join in round. And now we'll proceed in Dewdrop Pattern, from page 149 of Barbara G. Walker's A Treasury of Knitting Patterns, which I've adapted for the round:

Rows 1 - 3: * k3, p3; rep from * 

Row 4: * yo, sl1-k2tog-psso, yo, k3 *

Rows 5 - 7: * p3, k3 *

Row 8: * k3, yo, sl1-k2tog-psso, yo *

Arrow Hat

Arrow Hat

Once again, I bought this yarn because it was on sale, and once again, I'm thrilled with my decision! Not only does this yarn knit up nicely, and with a good drape-y texture, after all, but it also doesn't chafe the fingers despite being all animal fibers. Furthermore, there's enough on the skein for a good project, so much so that I totally wasn't even close to running out by the end of this hat. Huzzah!

Yarn: Berroco Ultra Alpaca Tonal (50% Alpaca, 50% Wool; 215 yards [198 meters]/100 grams); #6321 (purple) - one skein

Needles: One 16" circular needle in size 8 (go to a size 7 if you want a tighter band), one 16" circular needle in size 10, and one set of double pointed needles (dpns) in size 10

The pattern

Notions: Tapestry needle, stitch marker or yarn scrap to mark end of round 

Gauge: 20 stitches = 4 inches on size 8 needles

So let's get started! Using the size 8 (or 7) circular needle, cast on 108 stitches loosely, place marker, and join in round. Next, knit in a k1, p1 ribbing for 1 inch, then switch to your size 10 circular needle and we'll move on to the main pattern, which is an adaptation of Arrow Pattern from page 273 of Barbara G. Walker's A Second Treasury of Knitting Patterns (I added a stitch, and rewrote it for the round). Anyway, it goes as follows:

Row 1 (and all other odd rows): knit

Row 2: * yo, ssk, k3, k2tog, yo, k2 *

Chunky Triangle Rib Hat

Chunky Triangle Rib Hat

I've been eyeing this yarn for a while, but it took it finally going on sale for me to buy it (I think this color is discontinued). And once I brought it home, I knew that I needed to make a pattern simple enough that the variegation and chunkiness wouldn't hide the design. So here's what I came up with. Incidentally, I gave it the slouchy shape because I had enough yarn to do it; if you prefer a more traditional beanie shape, repeat the main pattern 6 times instead of 9, and the work the decreases as stated. Also, if you have a 16" circular needle in a 10 1/2 or a 10, you may want to work the ribbed band in that instead of the size 11, if you want it to fit tighter.

Yarn: Berroco Borealis (60% Acrylic, 40% Wool; 108 yards [100 meters]/100 grams); #5079 Hekla - 1 skein 


A close-up of the pattern.

Needles: one 16" circular needle in size #11, one set of double-pointed needles (dpns), also in size #11

Notions: tapestry needle

Gauge: 12 stitches = 4 inches

Using circular needle, cast on 70 stitches, place marker, and join in round. Knit 4 rows in a (k1, p1, k1, p2) ribbing. Then we'll move on to the main pattern, which goes like so:

Row 1: * yo, k3tog, yo, p2; rep from *

Rows 2 & 3: * k3, p2 *

Tilting Ladder Hat

Tilting Ladder Hat

Okay, so I made a hat like this for myself nearly a year ago, but, like a genius, I didn't write down the pattern. Then I didn't have any chunky yarn. Finally, however, I bought some and recreated the hat, as I think it's a really fun to knit, fast, and interesting pattern that's a nice weight for fall (with the holes and all). So let's get to it!

Yarn: Bernat Alpaca (70% Acrylic, 30% Alpaca; 120 yards [110 meters]/100 grams); #93310 Plum - 1 skein 


Needles: one 16" circular needle in size #10, one set of double-pointed needles (dpns), also in size #10, cable needle (cn) or dpn for cabling

The finishing

Notions: tapestry needle

Gauge: 15 stitches = 4 inches

Using circular needle, cast on 78 stitches, place marker, and join in round. Work 6 rows in a ribbing, which goes like so:

Ribbing row: * (k1, p1) five times, k1, p2 *

Once your six ribbing rows are complete, it's time to move to the Tilting Ladder pattern, which comes from page 210 of Barbara G. Walker's A Second Treasury of Knitting Patterns. It also goes as follows (after being adapted for the round, of course):

Row 1: * k5, p1, k5, p2 *

Row 2: * k5, p1, k1, (yo, k2tog) twice, p2 *

Bear Track Cowl

Bear Track Cowl

Okay, I bought a bunch of skeins of this yarn a loooong time ago, back when I could afford it (also, the local yarn shop was changing hands so it was on sale). And while I've knit it up a couple of different ways, I think that the bear track pattern on this one suits the yarn's variegation and thick-to-thin worsted weight well, although you should note that if you knit it with an unchanging worsted it won't have quite the same funkiness (post pictures if you do, also - I'm curious). Anyway, let's get to it!

Yarn: Misti Alpaca Baby Me Boo (50% Baby Alpaca, 30% Merino, 20% Bamboo; 174 yards [160 meters]/100 grams); #BBH07 Rosario - 1 skein (however, I've developed an uncanny knack for finishing up a skein with little to spare, so if you're a looser knitter, you may want to have two skeins on hand. On the flip side, since this pattern ends with I-cords, you could always use something like ribbon to tie up the cowl if you run out)


Needles: one set of straight needles in size 7, two double-pointed needles (dpns), also in size 7

Close-up of the pattern.
It doesn't pop too much with the
yarn's variegation, but it does add texture.

Notions: tapestry needle

Gauge: 18 stitches = 4 inches

Okay, to knit this piece we're going to start with the center bit (we'll pick up stitches along the edges to do the around-the-neck parts). So, using size 7 needles, cast on 81 stitches. The center piece will be knit in the Bear Track pattern, from page 225 of Barbara G. Walker's A Second Treasury of Knitting Patterns, and goes as follows:

Row 1 (right side): k1, * yo, (k1, p1) 7 times, k1, yo, k1; rep from *

Row 2: k1, * p2, (k1, p1) 7 times, p1, k1 *

Row 3: k2, * yo, (k1, p1) 7 times, k1, yo, k3 *, end last repeat k2

Row 4: k2, * p2, (k1, p1) 7 times, p1, k3 *, end last repeat k2

Sunburst Cowl

Sunburst Cowl

If you've poked around my blog at all, you already probably know that I love a good cowl (so efficient! harder for the kids to tug on! never has ends that could dangle in a toilet!, etc). And this is another design, made with sock yarn since that's what I've got hanging around. It's also easy to style in a couple of different shapes, and has a nice, lightweight appearance overall. Well, and yours doesn't have to be yellow...

Oh, and before we get started, I highly recommend you read through the pattern before beginning, just so you know how many repeats of different stitch sets we'll be doing!

Yarn: ShibuiKnits Sock (100% Superwash Merino; 191 yards [175 meters]/50 grams); #1900 Bright Canary Yellow - one skein


Needles: one 24" circular needle in size 4

The ol' pattern close-up.  Notice the holes.

Notions: tapestry needle, three stitch markers or scraps of yarn to mark stitches

Gauge: 26 stitches = 4 inches

To get started, we're going to cast on 198 stitches, place marker, and join in a round. Next, we're going to place the other two markers like so - k30, place another marker, p138, place another marker, and knit to beginning of row (30 stitches).

And now it's time to knit exactly ONE repeat of the main pattern, which goes as follows (we'll return to it later in the piece, although we're gonna do some short rows before we get back to it):

Row 1: p30, slip marker, * k2tog, yo, k1; rep from * until you reach the next marker, slip marker, p30

Rows 2 & 4: k30, slip marker, *k1, p1, k1 * until next marker, slip marker, k30

Row 3: p30, slip marker, * k1, yo, k2tog * until you reach the next marker, slip marker, p30

Handkerchief Cowl

Handkerchief Cowl

Okay, let's be real here.  For some ridiculous reason, I only bought one skein of this yarn, and I bought it on vacation, so I couldn't exactly pop to the store for another.  And that has seriously limited the yarn's utility, although a combination of my small neck and industriousness (I totally had to cut off the cast-on tail and use it to cast off; that's how low on yarn I was) has produced a decent result.  That being said, let's take a moment to talk about sizing!

As mentioned, I have a small neck.  I also have a healthy stash of scraps, so finding something else to make the I-cord to finish this beast was easy (I used the leftovers from the Arrowhead Lace Cowl).  However, I strongly, STRONGLY suggest having two skeins of yarn on hand to work this piece (or at least 100 yards), especially if your neck is any bigger than mine (12" around, by my husband's measure).  Furthermore, I suggest working the lace portion of this pattern to your neck's circumference, if not larger, for fit and comfort (the overall circumference of the piece is slightly larger, based on the positioning of the eyelets for the I-cord lacing, but not much).  Then you might even have enough yarn to work a matching I-cord!

Yarn: Cascade Luna (100% Peruvian Cotton; 82 yards [75 meters]/50 grams); #727 Coral - 1 - 2 skeins (2 highly recommended), plus some stash scrap yarn in a complimentary color, should you decide to knit the I-cord from a different material

A close-up of the closure

Needles: One set of straight needles in size 7, one cable needle (cn) or double pointed needle (dpn) for cabling, one set of dpns in size 7 for working the I-cord

Notions: Tapestry needle

Gauge: 18 stitches = 4 inches

Let's get this party started!  First, cast on 12 stitches.  Now, we're immediately going to begin working a double cable (from page 243 of Barbara G. Walker's A Treasury of Knitting Patterns), which goes as follows:

Rows 1, 3, 5, & 7 (wrong side): k2, p8, k2

Row 2: p2, slip next 2 stitches to cn and hold in back, k2, k2 from cn, slip next 2 stitches to cn and hold in front, k2, k2 from cn, p2

Rows 4, 6, & 8: p2, k8, p2

Spiral Column Cuff

Spiral Column Cuff.  And the door.

Okay, so my yarn stash is dwindling and I'm trying to come up with stuff I can make from the scrapple of things I've already made.  Or in other words: enter the Spiral Column Cuff, which I made with the leftovers from the Madeira Mesh Cowl.  Yay, it's a twofer!

Yarn: Berroco Linsey (64% Cotton, 36% Linen; 114 yards [105 meters]/50 grams); #6556 Shell - less than 1 skein 

Horribly offended by the lace-in-the-front proposition?
Guess what?!?!  You can also put it in the back!!!

Needles: One set of straight needles in size 6, two double-pointed needles (dpns) also in size 6 (for the i-cord, of course!)

Notions: Tapestry needle

Gauge: 21 stitches = 4 inches

Using your straight needles, cast on 32 stitches.  We're going to work a few eyelets for the lacing, so let's get started!

Set-up Row 1 (right side): p1, * k6, p2; rep from *; end p1 instead of p2

Set-up Row 2: k1, * p6, k2 *; end k1 instead of k2

Set-up Row 3: p1, * k1, k2tog, (yo) twice, ssk, k1, p2 *; end p1 instead of p2

Arrowhead Lace Cowl

Arrowhead Lace Cowl

The idea for this cowl has been brewing for some time now, and I finally got a yarn that seemed perfect for it (also, the fact that it's basically a worsted-weight cotton makes it knit up quickly, and have a nice, cozy weight).  Basically, it's buttoned in the back, with a ribbed section to go around the neck, and then it explodes into a wide lace bit for the front.  And it's really fun to knit, if I do say so myself.

Yarn: Plymouth Yarn Sweet Caroline (100% Cotton; 76 yards [69 meters]/50 grams); #4021 White/Yellow - two skeins

Needles: One set of straight needles in size 7

Notions: Tapestry needle, 3 1/2" or 7/16" inch buttons, plus needle and thread if your yarn won't fit through the button holes

The pattern, yo.

Gauge: 20 stitches = 4 inches

So let's get started!  Cast on 21 stitches, and work the first couple of rows to include buttonholes as follows:

Row 1 (right side): * k1, p1; repeat from *

Row 2: * p1, k1 *

Row 3 (buttonhole row): k1, k2tog, yo, (p1, k1) x 3, k2tog, yo, (p1, k1) x 3, p1, yo, ssk, k1

Continue to work fabric in a k1, p1 ribbing until piece measures about 4 inches in length, and you're just about to begin a right-side row.  Now it's time to work some short rows for shaping.