Banded Cable Beanie

Banded Cable Beanie

Sometimes a good hat needs no introduction. Or at least that's what I'm telling myself today because, quite frankly, I don't feel like writing one. Nevertheless, I will tell you that this hat works up quickly and reasonably easily for a cabled number and is suitable for the larger-headed amongst us (as well as the smaller-headed, although it won't be overly snug). It's also pretty snappy looking, if I do say so myself.

Yarn: Berroco Vintage Chunky (52% Acrylic, 40% Wool, 8% Nylon; 136 yards [125 meters]/100 grams); #6146 Azure - one skein

A better look at the decrease.

Needles: One 16" circular needle in size US 9, one 16" circular needle in size US 10, one set of double pointed needles (dpn), also in size US 10, and a cable needle (cn)

Notions: Tapestry needle, stitch marker

Gauge: 14 stitches = 4 inches in stockinette

So let's make a hat! Using your size 9 needle, then, cast on 75 stitches, place marker, and join in round. Then we'll work our ribbing as follows:

Ribbing Row: * (k1, p1) twice, k1; rep from *

Float Flutter Fly Scarf

Float Flutter Fly Scarf

I know what you're thinking: Isn't this scarf named for a line in a song in an episode of The Backyardigans? And to that, I say: of course not! What do you think I am, some kind of lunatic? No, I am merely using these three delightfully alliterative words to remark on this scarf's floating ends and fluttering edges, as well as the fact that you'll fly through making this not-too-basic knit and purl design. Any presumed reference to Uniqua, Tasha, Tyrone, and Pablo's quest for a levitating stone is purely circumstantial.

Update as of January 27, 2016: A sharp-eyed commenter brought it to my attention that both my set-up row and my first pattern row were labeled wrong side. Therefore, I've chosen to omit the set-up row from the pattern. If you're halfway through and are lamenting this decision, please don't worry! I highly doubt you will notice the presence or absence of this row when you reach the end of the scarf; you'll be too busy twirling in it to notice. :)

Yarn: Berroco Folio (65% Superfine Alpaca, 35% Rayon; 219 yards [200 meters]/50 grams); #4563 Napa Valley - 2 skeins

A closer look at the knits and the purls.
And a mannequin's armpit.

Needles: Straight needles in size US 5

Notions: Tapestry needle

Gauge: 22 stitches = 4 inches in stockinette

And now, it's time to make a scarf! With that in mind, cast on 37 stitches loosely. Then we'll get straight to our pattern, which you'll find below. Note that it's a-okay to pull your yarn tight behind your 5 slipped stitches; this will help form that little ridge in the middle of the scarf.

Row 1 (wrong side): purl

Bippity Boppity Beanie

Bippity Boppity Beanie

There are times when I feel like a perfectly ordinary adult woman going about her life in a perfectly ordinary fashion. Then I get terrible ideas (such as naming this hat the Bippity Boppity Beanie) and I JUST CAN'T LET THEM GO. Then it's clear that something went wrong somewhere. I blame my mother. 

Something I can't blame her for, however, is how magical this hat turned out (hence the name). Made with a basic striped knit and purl design, this hat's texture is both incredibly easy to achieve and optical illusion-tastic. So if you're ready to knit up a little magic, I highly recommend this beanie. Yes, it's unfortunate that you won't be able to tell your friends the name of the pattern out of sheer embarrassment. But perhaps you can just email them a link.*

* Double bonus: I made this hat with the leftovers from the Another Brick Cowl. Just in case you're bundle knitting for the holidays!

Yarn: Cascade Yarns Cascade 220 Sport (100% Peruvian Highland Wool; 164 yards [150 meters]/50 grams); #8891 Cyan Blue - one skein (color A) & #9421 Blue Hawaii - one skein (color B)

A closer look. The pattern manages to give an
appearance of vertical color stripes despite the
fact they're horizontal.

Needles: One 16" circular needle in size US 6, one 16" circular needle in size US 5, and one set of double pointed needles (dpns), also in size US 6

Notions: Tapestry needle, stitch marker

Gauge: 22 stitches = 4 inches on size 6 needles 

So let's make a hat! First, then, using your size 5 needle and your color A yarn, cast on 114 stitches, place marker, and join in round. Then we'll work the following ribbing row:

Ribbing Row: using color A, * k3, p3; rep from *

Little Tent Hat

Little Tent Hat

I'm paying the piper with this pattern - and, by "the piper," I mean my eldest son, who has learned that he only needs to bat his sweet little eyes at the yarn store to get almost any fiber he wants (I draw the line at novelty). So, he picked the yarn, and then we picked the pattern together; something whimsical and fun, but that would suit both children and adults. Speaking of which, I've designed this hat in four sizes, which should cover everyone from about 18 months to adult (because - scarily enough - there really isn't that much of a difference in head size). If you need any additional guidance choosing a size, just let me know in the comments! :)

Sizes: Toddler (Child; Teen/Small Adult; Large Adult)

Yarn: Cascade Yarns 128 Superwash (100% Superwash Merino Wool; 128 yards [117 meters]/100 grams); #1952 Blaze - one skein plus a little scrap white for the pompom (oh, and if you're making the adult large hat, you may need 2 skeins to complete the pompom)

A closer view of the little tents

Needles: One 16" circular needle in size US 9, one 16" circular needle in size US 10, and one set of double pointed needles (dpns), also in size US 10

Notions: Tapestry needle, stitch marker

Gauge: 14 stitches = 4 inches on size 10 needles 

And now that we know what we're working with, let's get started! Using your size 9 circular needle, then, cast on 60 (66; 72; 78) stitches, place marker, and join in round. Then we'll knit some ribbing to get started, as follows:

Another Brick Cowl

Another Brick Cowl

I created this week's design in response to another user request; specifically, I got feedback that someone was looking for a slipped stitch cowl pattern that used three colors, but in stripes rather than all at once (does that make any sense?). Anyway, I think it took me longer to settle on my color choices than it did on the slipped stitch pattern, especially since this one knits up beautifully and cleanly, without the stitch tugging effect that some such patterns can have. So, basically, if you're in the mood for a fun color project (or a scrap-buster; think what you could do with more colors!), this cowl might be just what you're looking for! :)

Yarn: Cascade Yarns Cascade 220 Sport (100% Peruvian Highland Wool; 164 yards [150 meters]/50 grams); #8010 Beige - one skein (color A), #9421 Blue Hawaii - one skein (color B), & #8891 Cyan Blue - one skein (color C)

A closer view of the slipped stitch pattern

Needles: One 16" circular needle in size US 6; one 16" circular needle in size US 5

Notions: Tapestry needle, stitch marker

Gauge: 22 stitches = 4 inches on size 6 needles 

So let's make a cowl! First, then, using your size 5 needle and your color A yarn, cast on 120 stitches, place marker, and join in round. Then we'll work the following ribbing row:

Ribbing Row: using color A, * k2, p2; rep from *

Winter's Eve Cowl

Winter's Eve Cowl

I've done everything in my power to post one new knitting pattern each Wednesday (something I maintained even through the birth of my youngest!), but this week finally broke me. My next project isn't quiiiiite done. Luckily, I can still share the Winter's Eve Cowl, which I just designed for AllFreeKnitting. You can find the link below. And I promise - to make up for it, next week's project will be a stunner!

Yarn: Lion Brand Yarns Hometown USA (94% Acrylic, 6% Rayon; 64 yards [59 meters]/113 grams); #202 Aspen Tweed – 3 skeins

A closer look at the pattern.
Knits and purls, baby, knits and purls.

Needles: straight needles in size US 13, straight needles in size US 15 for provisional cast on

Notions: tapestry needle

Gauge: 9 stitches = 4 inches on size US 13 needles

To make this little lovely, which uses the Kitchener stitch for a seamless, double-wrapping appearance, you'll actually need to head on over to the AllFreeKnitting website. And the link is right...

Autumn Rose Cowl

Autumn Rose Cowl

While I love (virtually) all knitting, I especially love designing pieces with a certain person in mind. This cowl was inspired by one of my kids' teachers, who has definitely earned something extra through her kindness and patience despite my kids' occasionally, ahem, * energetic *, behavior. As an added bonus, this cowl's simple design shows off the beauty of the yarn, and is also suitable for beginning knitters or as something to keep your hands occupied during a good movie.

Yarn: Malabrigo Mechita (100% Merino Superwash; 420 yards [385 meters]/100 grams); #862 Piedras – one skein 

It's amazing what you can do with a few knits
and some purls!

Needles: One 16" or 20" circular needle in size US 2

Notions: Tapestry needle, stitch marker

Gauge: 26 stitches = 4 inches in stockinette on size US 2 needles

Which brings us to the cowl-making! With that in mind, cast on 140 stitches loosely, place marker, and join in round. And then we'll begin our edging rows, as follows:

Edging Rows 1 - 4: * k10, p10; rep from *

Austrian Block Hat

Austrian Block Hat
Size Adult Small

I wish I had a super-good story for this hat, but I don't. Basically, I had the yarn (left over from the Little Red Hooded Cowl), I saw the stitch pattern, and the hat-baby I imagined would result from the combination of the two seemed neat. And, whaddya know, it IS neat, and makes a quick, unisex knit perfect for your last-minute holiday gifting needs (not that we're there yet!).

Sizes: Adult Small (Adult Large)

Yarn: Plymouth Yarn Encore Chunky (75% Acrylic, 22% Wool, 3% Rayon; 143 yards [131 meters]/100 grams); #999  - one skein 

A closer look at the pattern.
So blocky!

Needles: One 16" circular needle in size US 9, one 16" circular needle in size US 10, one set of double pointed needles (dpns), also in size US 10

Notions: Tapestry needle, stitch marker

Gauge: 14 stitches = 4 inches on size 10 needles 

And now it's time to make a hat! Using your size 9 needle, then, cast on 70 (80) stitches loosely, place marker, and join in round. Then we'll work a ribbing row, as follows:

Ribbing Row: * k1, p2, k2, p1, k2, p2; rep from *

Knit this ribbing row 8 times (10 times) and transfer your work to your size 10 needle. Now it's time to begin the main pattern, which is a Austrian Block Pattern from page 146 of Barbara G. Walker's A Second Treasury of Knitting Patterns. To do it, we'll need some terminology, as follows:

rt (right twist): knit two together, leaving stitches on left-hand needle; next, insert right-hand needle from the front between the two stitches just knitted together, and knit the first stitch again.  Finally, slip both stitches from left-hand needle together