Italian Wheat Hat

Italian Wheat Hat

Um, so it's a hat?  Yes, definitely a hat.  I got the idea for this after knitting the Wheat Ear Cuff, since I thought the cabling could be retooled into a cool hat.  And that's pretty much all I've got for this one...

Yarn: Cascade Yarns Quatro (100% Peruvian highland wool; 220 yards [200 meters]/100 grams); #5019 Green Tea - I used what was left after I made the Zig Zag Legwarmers, which was almost exactly 3/4 of a skein

Needles: One 16" circular needle in size 8, one 16" circular needle in size 10, one set of double-pointed needles (dpns) in size 10, cable needle (cn) or extra dpn

The finishing.

Notions: Tapestry needle, stitch marker or scrap of yarn

Gauge: 18 stitches = 4 inches on size 8 needles

Cast on 108 stitches, place marker, and join in round.  Knit one inch in a k1, p1 ribbing.  Now it's time to switch to your size 10 circular needle, and your main pattern, which is a mash-up of Italian Chain Ribbing (from page 47 of Barbara G. Walker's A Treasury of Knitting Patterns) and the Wheat Ear Cable (from page 244 of the same).  You'll need the following notation to get 'er done:

fc (front cross): slip 3 stitches to cn and hold in front; knit 3, knit 3 from cn

fc-2: slip 2 stitches to cn and hold in front; knit 2, knit 2 from cn

Wheat Ear Cuff

Wheat Ear Cuff
Even the baby had to get in on this action...

As an avid knitter, I have what feels like thousands of small piles of yarn laying around the house; skeins with too little left to make anything "real", but just enough that my grandmother would yell at me if I threw them away (you should have seen her refrigerator!).  Hence the Wheat Ear Cuff, which not only makes an attractive bracelet, but would also make a sweet headband if knit to about 21" in size for an adult (unsurprisingly, I didn't have enough yarn for that!).

Yarn: Cascade Yarns 220 Superwash Paints (100% Superwash Wool; 220 yards [200 meters]/100 grams); #9860 Jelly Bean - less than 1/3 skein

Needles: Straight needles in size #7 (to be fair, I knit this on a couple of double-pointed needles, but you know what I mean - it goes back and forth, not around!), cable needle (cn) or extra dpn

The buttons I found in the bottom of my knitting bag

Notions: Tapestry needle, 3 7/16" buttons (or whatever you have laying around, as long as they will fit through the holes and secure the piece)

Gauge: 20 stitches = 4 inches in stockinette - however, for this piece, it doesn't matter much

First, let's talk about sizing.  This piece will look best with a tight fit, and since everyone's wrists are different, you will pretty much just want to knit it to the exact dimension of your own (or of the person you're giving it to).  However, my finished piece measures just over 7", if you really want to know.

Anyway, let's get started.  To begin, cast on 22 stitches.  The main pattern we're using is a very slight variation on the Wheat Ear Cable from page 244 of Barbara G. Walker's A Treasury of Knitting Patterns, but first we're going to work the buttonholes.  Or in other words:

Lace Butterfly Hat

Lace Butterfly Hat

Okay, so this hat is for the same person who requested the Mesh Flower Hat, and she wanted something that was similar and in the same yarn, but that had larger holes.  And that pretty much covers it, although I will note that this hat is slightly slouchier, and I had more yarn left over, so it didn't get quite as scary at the end.  Oh, and I think the "butterfly" aspect of the lace would show up better in a lighter-colored yarn, but I still like the vine-y nature of the pattern.

Yarn: Berroco Ultra Alpaca Light (50% Super Fine Alpaca, 50% Peruvian Wool; 144 yards [133 meters]/50 grams); #4277 Peat Mix - one skein

Needles: One 16" circular needle in size 5, one 16" circular needle in size 8, one set of double pointed needles (dpns) in size 8

Close-up of pattern

Notions: Tapestry needle, stitch marker or yarn scrap to mark end of round (the scrap might work better, given the gauge)

Gauge: 23 stitches = 4 inches on size 5 needles

So let's get started!  Using the size 5 circular needle, cast on 120 stitches loosely, place marker, and join in round.  Work one inch in a k1, p1 ribbing and then switch to your size 8 needle; now it's time to begin the main pattern, which is Lace Butterfly from page 189 of Barbara G. Walker's A Treasury of Knitting Patterns, except adapted for the round. 

Row 1: * (yo) twice, ssk, k2tog; rep from *

Oopsie Daisy Diagonal Hat

Oopsie Daisy Diagonal Hat

Okay, so before we get any further - pretty much the only reason I made this hat was to see if I could make both the hat and the Lady Lawyer Arm Warmers with one skein of yarn.  And guess what?  It totally worked, and my children are rejoicing as we speak (that's a lie.  they're actually just yelling at me).  And besides that - well, the reason I called it the "Oopsie Daisy Diagonal Hat" was because the stitch pattern was a total accident, a cock-up if you will, since I meant to do something else.  By the time I realized it wasn't working out, though, I was too far along to care.  And I ended up liking the textured diagonals anyway, so it all worked out.  Especially the whole one-skein business.  So let's get to it

Yarn: Berroco Ultra Alpaca Fine (50% Peruvian wool, 20% Super Fine Alpaca, 30% Nylon; 433 yards [400 meters]/100 grams); #12171 Berry Pie Mix - one skein

Needles: One 16" circular needle in size 3, one set of double pointed needles (dpns), also in size 3

Close-up of the accidental pattern

Notions: Tapestry needle, stitch marker or scrap yarn

Gauge: 30 stitches = 4 inches in stockinette on size 2 needles

Using circular needle, cast on 154 stitches, place marker or scrap yarn, and join in round.  Knit 1 inch in k1, p1 ribbing.

Now it's time to begin the main pattern.  Here goes!

Row 1: * k1, yo, ssk, yo, sl1-k2tog-psso, yo, k1; rep from *

Lady Lawyer Arm Warmers

Lady Lawyer Arm Warmers

Okay!  So much like the last hat I posted, these arm warmers are for a friend, by request.  And as you've probably guessed by now, she's a lady lawyer in Alaska, where the courtrooms are cold but the justice is hot (or so they say).  Either way, she wanted something delicate and eggplant-y, and I loved this stitch pattern too much to use any other (none of the pictures show it really well, but the basic pattern is a big hole in the center of a four-stitch rib, and then two little holes on the side two rows up, repeated over and over).  Or in other words, it's perfect for all your Alaskan justice-related needs.

Yarn: Berroco Ultra Alpaca Fine (50% Peruvian wool, 20% Super Fine Alpaca, 30% Nylon; 433 yards [400 meters]/100 grams); #12171 Berry Pie Mix - one skein

Needles: One set of double-pointed needles (dpns) in size 1

Notions: Tapestry needle

A little bit better view of the pattern, with a twist

Gauge: 30 stitches = 4 inches in stockinette on size 2 needles

Now, before we get started, let's talk about sizing for a moment.  To make these arm warmers, I cast on 72 stitches, and they're intended for a person whose forearms and base-of-thumb hand-parts measure roughly 9.5" around.  Each iteration of the pattern is 6 stitches and little under 1"; for that reason, you can change the size of these arm warmers by simply casting on more or less stitches.  If your forearms are smaller than 9.5" you can comfortably wear larger arm warmers, but they won't stretch and show the pattern off as well.  So if your forearms/base-of-thumb-hand-parts measure about 8.5", consider casting on 66 stitches, cast on 60 stitches if they measure 7.5", and even less if you're making these for a child (and conversely, cast on 78, 84, etc. stitches if your forearms and hands are larger).  Luckily, this is only something you have to think about once, when you do your initial cast-on!  So let's get started.

Mesh Flower Hat

Mesh Flower Hat

Alrighty!  First of all, I have to admit that I am super excited about this hat, pretty much exclusively because I knit it to specification for a friend.  Or in other words, she wanted something black, slouchy, and light-weight that would serve for multiple seasons.  And this hat is all of those things, and is even knit in a mesh (although I wasn't able to get a good close-up, so you're just going to have to trust that there are little holes between all of those nubblies).  Plus, a flower!  Awww....

Yarn: Berroco Ultra Alpaca Light (50% Super Fine Alpaca, 50% Peruvian Wool; 144 yards [133 meters]/50 grams); #4245 Pitch Black - I used one skein but I only had 15 feet or so left by the end - so you may need two skeins, ESPECIALLY if you decide to make this hat a bit slouchier

Needles: One 16" circular needle in size 5, one 16" circular needle in size 4, one set of double pointed needles (dpns) in size 4

Notions: Tapestry needle, stitch marker or yarn scrap to mark end of round (the scrap might work better, given the gauge)

Gauge: 23 stitches = 4 inches on size 5 needles

So let's get started!  Using the size 5 circular needle, cast on 120 stitches loosely, place marker, and join in round.

Knit in k1, p1 ribbing for 1 inch, then switch to your size 4 circular needle and the mesh pattern, which is as follows:

Row 1: * yo, ssk; rep from *

Row 2: * yo, p2tog *

Repeat rows 1 & 2 until piece measures about 6 inches in length (if you want to make sure you can knit it with one skein, maybe only knit until it measures 5 1/2" here) and you've just completed row 2.  You can add another inch or so if you have another skein and want it extra-slouchy.  Then, to continue, you'll need the following notation:

Zig Zag Legwarmers

Zig Zag Legwarmers

So, in case you can't tell from the socks I'm wearing in this picture, I love me some bright colors.  That's probably why I fell in love with this yarn as soon as I saw it.  And besides that - well, I wanted a zig zag pattern and I thought it would be cool to change the texture of the stripes (hence the seed stitch).  The use of the twisted stitches also adds another interesting dimension to the legwarmers, especially when scrunched up.  And finally, each iteration of this pattern (the two zig zag stripes) is 12 stitches in total, which adds 2 inches to the circumference, so these legwarmers are easy to size up and down.  As they're knitted, they have a 12 inch circumference and are about 11 inches top to bottom - add 12 more stitches and they'll be 14 inches around, subtract 12 and they'll be 10 and good for a child.

Yarn: Cascade Yarns Quatro (100% Peruvian highland wool; 220 yards [200 meters]/100 grams); #5019 Green Tea - two skeins (I knit almost exactly 1.5 legwarmers with one skein, so you should still have plenty of yarn if you size them up)

Needles: One set of double-pointed needles (dpns) in size 8, one set double-pointed needles in size 7 

A close-up of the pattern.  So cheery!

Notions: Tapestry needle

Gauge: 18 stitches = 4 inches on size 8 needles

Using the size 7 dpns, cast on 72 (60, 84) stitches, divide between three dpns in groups of 12 stitches, and join in round

Knit in p1, k1 ribbing for 1 inch (please note that's purl one, knit one, NOT k1, p1), and then you're going to switch patterns AND needles - it's time to head to the #8's.  You'll need the following notation to proceed:

Feather Lace Cowl

Feather Lace Cowl

Okay.  So I had more orange yarn after making the Gathered Mesh Cowl, but my fingers weren't up to the task of knitting another cowl on size 4 needles (I don't know about you, but smaller gauges really tax my hands).  Anyway, since I wanted to use bigger needles, I definitely had to work another mesh/lace design, so I came up with this.  It's very simple, with the only shaping coming in the form of the bind-off, and it's reversible and great for spring!  So let's get to it.

Yarn: Cascade Yarns Sateen (100% Acrylic; 300.7 yards [275 meters]/100 grams); #24 Orange Poppy - once again, just one skein

A close-up of the pattern.  Once again, it's reversible!

Needles: One 24" circular needle in size 8

Notions: Stitch marker, tapestry needle

Gauge: 24 stitches = 4 inches in stockinette on size 4 needles (but since we're using 8's, who cares, eh?)

Cast on 180 stitches, place marker, join in round

Slouchy Baby-Cabled Stocking Hat

Slouchy Baby-Cabled Beanie.  To the stars.

All right!  So I had this yarn left over after finishing the Two-Tone Marrowbone Hat, and I wanted to make something that screamed '80s ski bunny, while also being versatile.  And hence this hat was born.  Basically, it's a hat with a little more give than your average beanie, which makes it perfect for multiple styles or big hair, and the pom pom is an optional accent.  I love the way this yarn's variegation knitted up in this pattern, too!

Yarn: Cascade Yarns Pacific (40% Superwash Merino Wool, 60% Acrylic; 213 yards [195 meters]/100 grams); #505 Caribbean blue - one skein

Needles: One 16" circular needle in size 8, one set double-pointed needles (dpns), also in size 8

Hey look!  You can fold the edge up too, if you want!

Notions: Stitch marker, tapestry needle

Gauge: 18 stitches = 4 inches

Cast on 104 stitches, place marker, join in round

Knit in k2, p2 ribbing for 4 inches, and then you're going to switch patterns.  You'll need the following notation to proceed:

rt (right twist): knit two together, leaving stitches on left-hand needle; next, insert right-hand needle from the front between the two stitches just knitted together, and knit the first stitch again. Finally, slip both stitches from left-hand needle together

lt (left twist): with right-hand needle behind left-hand needle, skip one stitch and knit the second stitch in back loop; then insert right-hand needle into the backs of both stitches and k2tog-b (knit two together through back loops, inserting right needle from the right)

Now let's get to it!

Heart Headband

Heart Headband

As you may have guessed, I mostly knit this headband as a good way to get rid of some more of that skein of yarn I used for the Twilled Stripe Arm Warmers.  I also, admittedly, love hearts.  Finally, the adult version of this headband is intended for a head of about 22 inches in circumference; it would be easy to knit this pattern for a child by omitting 12 stitches, which would shave about 2 inches from the final circumference (and you'd cast on 84 stitches instead of 96).  And that's all I've got...

Yarn: Cascade Yarns 220 Superwash Paints (100% Superwash Wool; 220 yards [200 meters]/100 grams); #9860 Jelly Bean - maybe 1/3 skein?

Needles: One 16" circular needle in size #8

How it looks without the whole head-stretching-out aspect.

Notions: Tapestry needle, stitch marker

Gauge: 18 stitches = 4 inches in stockinette (once again, I kinda made that up and I didn't knit a test swatch. The label says that 5 stitches = 1 inch on US 7 needles, and yet again I'm using 8's since I don't have 7's in a circular needle either.  However, it's a pretty standard worsted weight, so any worsted weight yarn should work)

Cast on 96 (84) stitches, place marker, join in round.  Knit two rows in seed stitch, or in other words,

Row 1: * k1, p1; rep from *

Row 2: * p1, k1 *

Twilled Stripe Arm Warmers

Twilled Stripe Arm Warmers

Okay, I bought this yarn a couple of years ago (I think my plan, at the time, was to knit a sock monkey out of it.  But then I knit two OTHER sock monkeys, got bored, and put my yarn in the closet).  Anyway, I've been looking for a good use for it ever since, because it is admittedly quite girly but a big enough gauge that it's never going to look dainty.  And while I considered doing fingerless gloves (with a thumb hole, you know), ultimately I decided that this pattern would look best without the disruption.  And I have to say - I love the pattern, and the way that the variegation knitted up in stripes.  With one less pattern repeat, this would also be an excellent design for little girls.

Yarn: Cascade Yarns 220 Superwash Paints (100% Superwash Wool; 220 yards [200 meters]/100 grams); #9860 Jelly Bean - just one skein, baby!

Needles: One set of double-pointed needles (dpns) in size 8

A close-up!  Dude, I love this pattern.

Notions: Tapestry needle

Gauge: 18 stitches = 4 inches in stockinette (well, I kinda made that up and I didn't knit a test swatch.  The label says that 5 stitches = 1 inch on US 7 needles, and I'm using 8's since I don't have 7's and I can't spend the $$$ to buy a set.  Either way it worked)

Before we get started, let's take a moment to talk about sizing.  My forearms are about 8 inches in circumference and each iteration of this pattern (7 stitches per repeat) adds about an inch to the total circumference.  Therefore, if your forearms are one inch bigger, you can always add another set of 7 stitches (or if they're two inches bigger, two more sets, etc. - just remember that, if you choose to use this yarn or a similar one, the variegation won't knit up the exact same way).  Basically, this pattern is a deep rib, and you have lots of room to play.  So let's get to it!

Cast on 42 stitches (49, 56, etc.) and divide between 3 dpns in groups of 7 as evenly as possible.  Join in round.  If you cast on an even number of stitches, knit 1 inch in a k1, p1 ribbing.  Or, if you cast on an odd number of stitches, knit 1 inch in a p2, k1, p1, k1, p1, k1 ribbing.